Did you know that your garage door sensor is one of the essential parts for its safe operation? The more critical the sensors are, the more chances there are for their malfunctioning. Thus each of us needs to understand all the variables so that the garage door sensors are maintained all the time properly. One such challenge to watch out for is the direct exposure of sunlight to the sensors. So it is important to understand this potential challenge and ensure that your garage door sensors do not get highly affected due to the direct exposure to the sun.
The working principles of garage sensors
Two sensors on either side of a garage door are the heart of the automatic garage opener system. Constantly, either of the units sends infrared signals to the other side of the garage door opening. If the receiving sensor is getting the sunglass from the sending sensor, then the entire system allows electricity to flow so that the opener motor lets the garage door close or open. If the signal gets interrupted by any chance, the entire system will also interrupt the flow of electricity, resulting in a disturbance in the garage door operations.
Professional Option and Other Workarounds
In order to have a permanent fix for the sunlight interference problem, it is recommended to hire a professional for the sensor shields or custom-made sensor shields.
There are some other temporary workarounds to solve the sunlight interference problem. For example, one of the sensors can be protected with a piece of paper. In this process, when one of the sensors is not in direct sunlight, it could help to boost the infrared signal strength, and the garage door opens and closes smoothly. You can also use the cardboard of the toilet paper roll. This acts as an effective shield to your garage sensors. There are other options as well, like the PVC pipe. One important point that you should remember is that do not make the sensor shield too long as there might be chances for you to run on it while walking out of the garage.
Safety is essential
Sometimes homeowners become frustrated due to the garage door sensors that they end up overriding them. So first, check if your garage door has a manual setting that lets you manually override the garage door sensors so that the garage would go all the way down and up without letting it stop for any reason after the correct button is pressed. Garage owners should remember that garage door sensors are for their safety. The need for sensors became mandatory because the garage doors require a great effort to close, and the doors are heavy as well. Thus there is a chance of getting hurt while operating a garage door manually.
It is necessary to understand that continuous exposure to the sunlight on the garage door sensors can cause more than some temporary problems. As we know, sunlight has heat energy, and constant exposure to the sunlight would overhear the sensors resulting in it to stop working permanently. In addition, garage doors are made of a convex lens, which will focus the light from the sun’s rays on the electronic constituents in the sensor, leading to problems. Therefore it is suggested to fix the issues as soon as possible by hiring a professional garage door service Summerlin .
To Conclude
At the end of this article, you have an idea of how important garage sensors are and how you should take care of them. Hiring a professional to care for all that is related to your garage is always recommended. A professional agency with experience can take care of all garage door services. This will include the sensor protectors, replacement and repair of garage doors, garage door opener upgrades, garage door spring replacement and others.