Getting firmware update failure message while trying to update the firmware of your EX6100? Need not to worry! You have landed on the right post. Here, we will take you through some proven fixes that will help you resolve Netgear EX6100 extender firmware update failure issue. Let’s take the plunge!
Before walking you through the troubleshooting tips, let us first make you familiar with the reasons that let you experience the firmware update failure error. Have a quick glance below:
- You might have downloaded the corrupted or wrong firmware file
- Poor or slow internet connection
- Faulty EX6100 hardware
- Improper placement of your Netgear WiFi range extender
- Using damaged Ethernet cable
- Connected to a wrong network instead of Netgear_ext
So, now you know the reasons why you are getting a firmware update failure messages. Without further discussion, let’s take you through the solutions to get rid of the issue. Continue reading!
How to Fix Netgear Extender Firmware Update Failure Error
Fix 1: Check the Power Being Supplied to Your Netgear Extender
The first step in our post is to check the power supply being supplied to your Netgear EX6100 extender. Ensure that your Netgear extender is properly plugged into a damaged-free and working wall outlet. Also, verify whether your EX6100 extender is receiving a continuous power supply or not.
Fix 2: Check the LEDs on Your Netgear Extender
Once you plug your EX6100 into a working wall outlet, the second thing that you have to ensure is to check the LEDs on your device. The LEDs on your Netgear extender must be green and stable. On the off chance if you found any of them blinking for too long, simply restart the device.
Fix 3: Check the Placement of Your Netgear Extender
If your Netgear extender isn’t placed correctly, then also it can be one of the main reasons behind the firmware update failure error. Yes, you read it right! The placement of your Netgear WiFi range extender plays a very important role in making your device up and running. So, make sure that your extender is placed openly and within the reach of your existing router.
Fix 4: Check the Ethernet Cable you are Using
In the event that the Ethernet cable you are using to connect your Netgear extender and router is damaged, then you will not be able to update the firmware of your device. Thus, to fix the issue, make sure to use a well-maintained Ethernet cable to connect your Netgear EX6100 extender and router.
Once you’re done, try to update the firmware of your Netgear extender using mywifiext.local web address. If you are a user of Android or Windows OS, then use www.mywifiext.net as the default web address.
Fix 5: Check with Your ISP
The next thing that you have to make sure about is the internet speed you are getting from your service provider. Ask your ISP if your data plan is active. Apart from that, all your pending internet bills must be cleared. And what’s more? The device provided by your ISP must be up-to-date.
Fix 6: Check the WiFi Network you are Connected to
No matter whether you are about to perform the Netgear EX6100 setup or trying to update the firmware of your device, you must be connected to the correct network. In the event that you get connected to an unknown network, you will surely face firmware update issues along with configuration and WiFi-related issues.
Still, getting the firmware update error message? Try to power cycle or reboot your Netgear extender. The simple power cycling process is enough to make your Netgear EX6100 extender working.
Even after power cycling your Netgear extender, can’t you get the most out of your device? Feel free to drop all your issues into the comments section.