Learn About Three Types of Industrial Mixers


Various processes require them. The types are Liquid whistles, Ribbon blenders, and Rush turbines. Read on to learn more about them. The manufacturing industry is comprised of different sectors. Each of them needs a different kind of industrial mixer. Find out what each one does and how they can be used for your needs.

Liquid whistles

A variety of applications call for the use of liquid whistles. These devices work in various processes, including the emulsification of vegetable oils. They are usually comprised of a mixer and an agitator. A Sonolator is an industrial mixer that emulsifies multiphase fluids and creates high-value liquid products. This research combines computational and experimental work. They focused on the single-phase behavior of liquid whistles and kinetic energy dissipation. The results of this study were promising.

A static mixer is an excellent choice when mixing tank space is limited, and speed is an essential factor. However, these mixers can be slow and expensive, and they’re often used in laboratories and small-scale applications. The difference between a static and a dynamic mixer lies in how they work. Liquid whistles work by forcing the high-pressure fluid to pass through a blade. This causes the fluid to undergo high-turbulent stresses, which aid in mixing, emulsification, and deagglomeration. Ribbon blenders are also common in dry-mixing operations. They feature a 2-helix blade that moves the product in opposite directions.

Ribbon blenders

These ribbon blenders have a semi-cylindrical or cylindrical shell. The cylindrical shell is easier to clean, but the U-shaped shell can handle higher pressures. Ribbon blenders can be supplied with interchangeable paddle agitators and high-speed chopper blades.

Ribbon blenders can handle a variety of materials, including flour, plastics, and coffee. Ribbon blenders can handle a variety of materials, including flour, plastics, and coffee. These blenders are not for every application.

The types of ribbon blenders are categorized according to their functions. They can mix both dry and wet materials. Ribbon blenders are commonly used for mixing plastics, fertilizers, and food products. Ribbon blenders have a capacity of up to 4,000 liters. The capacity of ribbon blenders varies, so you must determine how much material you are processing. To help you choose the best ribbon blender, here are some tips.

Rushton turbines

If you’re planning on purchasing an industrial mixer, you should know about the Rushton turbine. They are used to increase the speed of mixing liquids and solids. While the power requirement of a Rushton turbine is similar to that of an Intermix agitator, the flow pattern is much less defined. The same is true for the mixing time of an impeller IV. Therefore, for the same amount of energy, the power number of an Intermix can reach three times that of a Rushton turbine.

Several parameters influence the agitation capacity of a Rushton turbine. First, the input of energy is crucial. Next, the mixing time is measured. Finally, the Rushton disc turbine optimizes the mixer by comparing the measured values to the literature. This will help you select the most suitable Rushton turbine for your application. The higher the input energy, the more energy-efficient it will be.

Rushton turbines can disperse gases. 

Share post:


More from Same Author